Ice Classifieds

Ice Boat items for sale

Click For Sale and enter a description of the item in the “Leave a Reply” box. You will be notified via email when someone is interested. If interested in an item click the “Reply” link below the item and respond.Want to include a picture? Add details as described above and email image to

44 responses

  1. Chris Geminski

    Yankee iceboat “Stinger”
    Located in Southampton, NY (eastern Long Island)
    One of two “Bite Me” boats (when hiked BITE ME is visible on the bottom of the boat in all caps)
    Meticulously restored by Keith Kennedy of NJ
    This is one of the nicest looking Yankees you will ever see, everything is in excellent condition
    23ft mast, 18ft plank
    Custom seat cushions in cockpit
    Amazing paint job, pin striping and lettering
    Dual steering (wheel and foot pedals)
    Two hull covers (storage and on ice)
    Covers for plank, mast and sails
    3 sails (one racing, one cruising, one storm)
    Two sets of stainless runners
    Hand brake
    Custom trailer with storage box for runners and tools
    Asking $8,000
    *Willing to consider trades for a Nite or Gambit
    Please contact Chris at (631) 466-6442 or

    12/06/2017 at 2:03 pm

  2. Greg Switzer Sodus Point

    I have an Arrow Ice boat for sale. $2000. Please pass it on. The sale number is 128.

    Please contact for details

    11/20/2017 at 8:33 am

  3. charles Silfvenius

    Tubular aluminum ICE BEETLE for sale. Breaks down to fit inside car. Slow and safe for younger sailors. Can take several on board. Asking $150. had it displayed at the swap.
    Unable to post photo. Email me for a picture and short video. Contact me

    11/14/2017 at 6:55 pm

  4. Rory Couturier

    Vary Nice DN Ice Boat for sale. Complete and ready to sail.
    DN Wedge Hull with stern plank and Bow plank.
    Aluminum mast and boom.
    North Sail Excellent condition.
    All new hardware and rigging.
    New Runners and wooden carry box
    Cockpit cover, with Sail Bag
    This Boat has been well cared for and lightly used and stored indoors.
    Asking $2,500 or best offer
    Contact info:
    Boat is located in Westport Ma.
    Ask for Rory
    Cell # 1-508-264-1813
    Home # 1-508-636-4545

    11/14/2017 at 12:38 pm

  5. Guy E Lovejoy

    Nice DN is very good condition for sale.

    The hull is a Norton wedge. Nice hull and the only thing I’ve noticed is the front bulkhead is not max forward.

    All Sarns hardware.

    Sherry Glass Whip which I always thought was a consistently good mast.

    Bryant alum. boom.

    Henry Bossett Shore sail. I believe but (not positive) it’s a wide range sail which was always a good sail.

    Nice plank made of (top/bottom) hickory with a basswood/hickory core. It’s probably for someone in the 200 lbs. range.

    Sarns bullnose runners with an extra steering runner.

    Travel covers (canvas from Bossett) for hull, mast, plank and sail/boom.

    Cockpit cover.

    Saw horses, ice screw, several mainsheets, some extra parts.

    The boat has been well cared for and lightly used.

    Located in Rochester, NY

    Contact Guy Lovejoy for pictures at

    was $3200. Now $2800!

    Contact info is:

    Doug Ryon
    585-377-0383 home
    585-704-0383 cell

    Please delete to want add for the arrow sail.

    Also I was unable to attach any photos of the DN for sale.

    11/10/2017 at 2:46 pm

  6. Charlie Clines

    I will be bring some stuff to the meet this Saturday. Blocks, small winches, some tools, antique wooden tool boxes, tail for a Cessna airplane and what ever else falls out of my garage and shop.

    Charlie Clines

    10/25/2017 at 7:12 am

  7. Al Schaeffer

    I have three vintage boats for sale Arrow Meade, Yankee, and “Big” Meade(this boat hull needs to be refinished). All parts included for boats plus I have extra runners, runner boards and mast. Boats are currently in North New Jersey. Contact me via email at

    10/16/2017 at 3:15 pm

  8. Chad Atkins

    -DN wedge hull with plank- Sarns chocks and hardware and possible full program with parts below.

    -Plate runners
    -30″ inserts with stiffeners (skeeter steering runners)
    -1/4″ molded winged 36″ inserts
    -36″ Max T’s
    -Composite DN mast
    -CSI 4.1 mast in primer
    -Forstmann DN boom

    -Like New Sarns chocks and caps $225
    -Melges DN sail-$100
    -DN sail and boom-$75
    -DN like mast-$75
    -DN plank with chocks/caps-$125
    -1D full full excellent condition-$700
    -North MS1 excellent condition -$700

    -Excellent condition North AP test sail-
        Luff curve modification, Out of IDNIYRA girth. Great for skeeter or other class craft

    Other parts and hardware avalible at swap as well

    All Gear in RI

    Chad Atkins

    10/11/2017 at 12:29 pm

  9. Bart

    Here's a very comfortable boat with great potential. She's a scaled down version of the venerable NorthEaster class from the 70's. Bart Chapin has built a splendid enclosed trailer, and she is complete and ready to go. Sets a DN rig, so the possibilities for unlimited performance enhancement are vast. Wheel steering, hand brake, T iron runners with oak bodies. Located in Arrowsic Me, just down the road from Bath. Asking $2500.oo. Contact Bart at

    10/04/2017 at 11:48 am

  10. Chad Atkins

    DN Sail Order-

    There has already been some interest in putting together a group/bulk order for New DN sails for the upcoming 2017/2018 season. If there is enough interest I will need to place the order by September 30th. The discount we receive will depend on how many sails are ordered. It’s just two months away… Feel free to send a note if you have any questions!

    Think Ice, Chad

    07/21/2017 at 10:14 am

  11. Dave clapp

    Complete DN package for sale. Hull built to Goodwin plans. Multi laminate ash plank with electron chocks. Luke’s mast. North sail. Aluminum boom. 1/4 inch insert runners boat is ready to sail. $3600

    03/09/2017 at 11:11 am

  12. Dave clapp

    European Ake’ Luke’s mast for sale. Beautiful white finish. Located in New Jersey. $1100 call dave@ 732-684-5870

    03/09/2017 at 11:02 am

  13. John

    DN: Excellent condition, stored indoors, no trailer
    Located in Highland Lakes, NJ
    # Of Runners: 6 (2 front steering runners and 4 sides; in both metal and plastic),Sail and Cover,Wood Cover for Hull
    $2,800. US or best offer
    Call John 201-452-1900 for more information

    02/23/2017 at 10:04 am

  14. Chad Atkins

    North Sails OD DN sails- Designed and developed here in New England. I have a few New and lightly used sails for sale. Great results coming in from these!

    Also two DN programs that could be used for cruising or racing depending on your budget, one fuselage is a nice modern wedge.

    Contact: Chad Atkins
    DN US 4487

    02/07/2017 at 5:03 pm

  15. norman viens

    NITE FOR SALE Available in Westport Ma. if interested call 5082646903

    02/03/2017 at 7:43 pm

    • How do I post? I have 2 20′ skeeter masts.

      Paul Delnero

      (:)+< PAD (:(+< 603-770-3310


      02/07/2017 at 9:04 pm

  16. Guy Polyblank

    Struble Hound.
    No new ones available till sometime after the Worlds.
    Guy 207 390 5984

    01/19/2017 at 9:13 am

  17. Rick Swinton

    DN Ice Boats
    Two complete DN Ice Boats with sails, rigging, aluminum spars, planks, fuselages, lines, (6) steel runners (blades), (6) FG skis and sharpening fixture.
    Package deal for both boats $4800. CDN
    FOB Orillia ON
    Contact John at 705-330-5393 or
    Rick at 705-238-8618

    01/18/2017 at 5:57 pm

  18. chris

    1-D Full Full Power DN Sail
    Excellent condition
    Possible delivery to the Worlds/NA’s

    01/17/2017 at 12:47 pm

  19. Complete 70’s Vintage DN, Wedge Style hull, Sarns Hardware. Kenyon mast, Very nice Shore sail with glass battens, wood boom, Harken blocks,, newer stay set, alligator blades freshly sharpened. Plank has Sarns aluminum chocks. This boat is ready to sale. $1600.00 Please contact Steve at or 781-724-0648.

    Also have a used Kenyon mast $200.00 and matching Shore sail with batten and bag $250.00. These could be used to complete and Ice boat project and get a second boat on the ice.

    01/14/2017 at 9:02 am


    Looking for a NITE ICEBOAT in the New England area. I have a friend that trucks to Hartford CT. and Boston weekly. Would prefer a complete package including trailer but would consider boat only. I live in eastern Canada but I will take care of everything including paperwork and transporting. Please respond with some pictures and any pertinent information. thanking you PETER MCLAINE 902-940-6189

    01/11/2017 at 1:49 pm

  21. jorysquibb

    Item wanted: I am looking for a bull-nosed sarns steering runner. please call Jory Squibb at 207 236 8962 or 207 706 6626

    01/10/2017 at 5:53 pm

  22. dalequayle

    I’m looking for sails for a couple of Skimmer 45’s. We are on a lake in NE PA, and we use the boats for recreational use only.

    01/09/2017 at 7:05 pm

  23. Andre Baby

    DN iceboat complete, ready to sail . Wedge hull, plank for about 200 pounds, Sherry Whip mast, North sail, 1 set Sarns plates, 2 min T’S, 2 slush angles, spare steering runner, boat cover :

    $ 3,500 Canadian dollars.

    Contact Andre Baby for info at 514 426 4066, email

    12/08/2016 at 9:21 pm

  24. Al Russell

    I have 3 DN Planks for sale, all have Sarn’s chocks and backing plates, as well as a Aluminum DN mast. Located in VT

    12/08/2016 at 2:06 pm

    • Al Russell

      The green on is basically unshaped ash, w/ chocks – $200.
      The black one is 2 opposed layers of ash, flexes 1.25 with 170 lbs, Sarns chocks – $250.
      The clear one is 3 layers/10 pieces/layer, with glass on bottom, sarns chocks – $300.

      Contact Al directly for details

      01/02/2017 at 2:47 pm

  25. kirk reynolds

    DN iceboat complete- runner plank and hull professionally built, Kenyon alum mast, Reynolds Sail like new, 2 sets runners, quick adjust forestay, 315-246-0496 $1500

    12/05/2016 at 10:55 am

    • John Shannahan


      I am looking to find a good DN and pick it up this weekend.

      John Shannahan

      01/11/2017 at 7:51 pm

  26. Guy E Lovejoy

    Set of alignment plates with padded case for sale. Precision machined. Used with a dial gage and an 8 +/- ft. pole. The part the runners rest on is 13.5 in. long. Asking $250. Contact Guy at 585-764-8494.

    12/01/2016 at 4:23 pm

  27. Dan Grimm

    Lockley Skimmer for sale- good condition, all bits and pieces included- $450
    Located in Plattsburgh, NY.
    Contact Dan Grimm at 585-474-5519

    11/27/2016 at 7:38 pm

  28. Own a piece of Ice Boat

    ! Early 1900 Palmer Class D Lingwes for sale.

    Described in 1938 book”Wings on the Ice” by Frederic Gardiner, pgs 131 – 133.

    · Front steerer, Wheel and tiller steering

    · Two cockpits

    · Two sets of runners (ice and snow)

    · Homemade trailer.

    · 350 lbs without crew

    · Located in Hanover NH

    · $4,000 OBO

    For more photos or information email

    11/13/2016 at 9:41 pm

  29. Andre Baby

    DN iceboat complete, ready to sail . Wedge hull, plank for about 200 pounds, Sherry Whip mast, North sail, 1 set Sarns plates, 2 min T’S, 2 slush angles, spare steering runner, boat cover :

    $ 3,500 Canadian dollars.

    Contact Andre Baby for info at 514 426 4066, email

    11/12/2016 at 7:43 pm

  30. Jay Whitehair

    Used Skeeter Parts Wanted:
    While at the New England Ice Yacht Association swap meet I couldn’t resist buying in on the vintage Mead 2 place skeeter “SCAT” with the hopes of generating some local interest and new ice boaters in our area. Maybe get some DN racing going around here. I can’t wait to take many friends on their first wide eyed sail! The restoration is already well underway and I hope to see some of you on the ice this season. The hook for me is that SCAT is missing a handful of parts, so before I make any silly, last minute temporary fabrications I thought I would ask to see if there are any very used parts laying around New England that are begging to be pressed back into service. Please contact me if you have any of the following or can help me piece back together the history of this wonderful little ice ship.

    set of runners
    side chocks – I have one Mead style chock now – for 1 1/2″ runner body
    Mast step ball set up
    side stay tangs
    small steering wheel

    ps. I originally went to the swap to set up an affordable race DN so that I can re-enter the sport after 20 years. I managed to spend the bulk of my recreational cash cache on parts to build a competitive DN – so I have little reserve at the moment. I am hoping anyone with a spare part or two for the Mead project will be willing to work with me on payment. I am so excited about taking others for a spin – I couldn’t say no! Please help me introduce others to the world of ice sailing…. shoot me an email!

    Jay Whitehair DN 4379
    Norwich VT

    11/09/2016 at 6:26 pm

  31. Lee Hancock

    For Sale: (FREE) Inexpensive ice boat kit. Kit includes hang glider parts and instructions on how to make an ice boat from those parts. Local pick up only. Hopkinton NH

    Email me

    11/03/2016 at 2:18 pm

  32. Fred Greis

    Two (2) Freshly Restored High Rig (23′ mast) Yankees for sale
    BOAT 1.
    Red with natural varnished deck
    16′ Plank
    Redundant Steering
    Runners and all hardware restored or replaced
    Bossett “fat head” sail, used twice, ready for your numbers. I removed the markings.
    Custom Canvas Hull Cover
    Custom made easy transport (single connection) cart with stainless axle, frame, poly wheels. Runner wheel cart included.
    This is a light hull.
    Asking $6,250 A new one would cost you north of $20K.

    BOAT 2.
    Blue with white mast and 16′ shaped plank
    Redundant Steering
    Custom Canvas Hull Cover
    Runners and all hardware restored or replaced
    Runners are the classic chrome over copper plate. Runner box included.
    Medium dacron sail. Different sail in photo.
    Hull has a glassed deck.
    Asking $5,000

    I have been sailing Yankees for a long time. These boats were in storage for years and since I love Yankees I decided to purchase and restore them so their would be two more out on the ice.I restored both of these this past year and need to make room in the trailer for my Yankee for the coming season. The asking prices reflect my time, materials, and initial investments so I have priced them very fairly.
    If there is interest, I will plan to bring both boats up from Long Island for the NEIYA swap meet, so please let me know.
    Fred Greis. RC LRIBYC.

    10/31/2016 at 3:17 pm

  33. Paul Zucco

    2 New DN hulls, hull only. Both have bass wood side boards and baltic birch decks. All west epoxy construction with clear finish. Up grade or have a back up . 1 Whizz hull and plank, no rig or blades. Boat has been sailed for 2 seasons. All hardware is there and has wheel steering. Plank has 9 inch Struble chocks that were mounted and aligned by Northwind. West epoxy construction with high gloss clear finish

    .1 Kenyon aluminum boom complete with blocks and jaws.Has slots for internal sheeting. All can be seen in Willington Ct. or at the swap meet. 860 429 8178 or

    10/23/2016 at 10:09 am

  34. Philip C Hax

    Have 2 All Stainless welded Lockley Skimmers on custom “A” frame in custom trailer. Asking $950 complete. May not make Westborough but package will be in Wallingford, Ct. Photos available if you E mail me Think ice, Phil Hax

    10/23/2016 at 8:56 am

  35. Chad Atkins

    DN package ready to go. Race or cruise equipped with a few options for sails, masts, booms.

    Sails for cruising or racing

  36. Melges, Shore, North, 1D
  37. Full and speed available
  38. Two Sarns plates- one 26″ steering with brake and one 30″
  39. One set plate runners
  40. One set Sarns chocks
  41. One set struble chocks
  42. Sarns insert steel low profile aluminum stiffeners
  43. Some assorted used/good condition hardware
  44. Forstman boom
  45. Wood boom
  46. Light weight plank with chocks
  47. Spare wires- assorted lengths with Sarns adjusters
  48. Finished Stripper mast
  49. Unfinished Stripper mast
  50. Aluminum mast
  51. CSI soft 5.1 mast
  52. CSI 3.5s mast
  53. Experimental CSI glass/carbon/core mast
  54. Vectran rope halyards
  55. 2 race planks- one finished ready to go, one shaped/glassed ready for hardware
  56. wooden runner boxes for inserts or plates
  57. Chad Atkins
    Equipment can be delivered to swap

    10/15/2016 at 11:26 pm

  • ICYWOOD FOR SALE. Fuselage designed and built by Dickie Saltonstall, modified for DN rig but also includes new Whizz sail with aluminum mast, boom and dedicated rigging. Pedal and wheel steering, Doug Raymond 36″ insert runners, DN full size and storm sail, composite mast, nice hardware. Very strong, light and able boat, ready to go. Includes enclosed trailer. Can be delivered to Swap Meet.
    Contact Jory Squibb: 207-236-8962 or Twenty-five hundred firm.

    09/26/2016 at 8:54 pm

  • Charlie

    I have an original style dn mast refinished and in good shape. Also one made from 2 “L” shaped pieces. No stays

    Contact via Email. or cell 603-455-2862

    09/18/2016 at 11:53 am

  • Chuck Sehulster

    Wanted: Arrow Plank

    Contact Chuck via email

    09/13/2016 at 11:03 am

  • Lea Wildermuth

    Lightly used Nite 36 in great shape with special paint job. Comes with Boston sail, skates, canvas covers, and recently painted trailer. Available in Cleveland, OH. Pictures and price negotiation available. Looking to sell ASAP.

    Please contact if interested.

    07/25/2016 at 2:54 pm

  • I have a bunch of Sarns runner and chock hardware for sale (cleaning out the basement to sell the house). It is all listed at the link below

    If your interested, please act before the end of September.. freshly retired and we wont be around after that for a few months.

    Questions please email directly at

    07/03/2016 at 4:47 pm

  • Leave a Reply

    Fill in your details below or click an icon to log in: Logo

    You are commenting using your account. Log Out / Change )

    Twitter picture

    You are commenting using your Twitter account. Log Out / Change )

    Facebook photo

    You are commenting using your Facebook account. Log Out / Change )

    Google+ photo

    You are commenting using your Google+ account. Log Out / Change )

    Connecting to %s